Worked checks

Three invented arithmetic sequences illustrate how the denominator changes between steps. These calculations report no physical fabric tests. Use consistent units and keep exact fractions before rounding a display.

100 -> 90 -> 99 mm

Begin at 100 mm. A -10% change uses 100 mm as its reference: 100 x 0.90 = 90 mm. Then +10% uses 90 mm: 90 x 1.10 = 99 mm. The overall change uses the original 100 mm: (99 - 100) / 100 x 100% = -1%. These invented stages demonstrate why opposite percentages do not cancel.

100 -> 80 -> 84 mm

Begin at 100 mm. A -20% change gives 100 x 0.80 = 80 mm. A subsequent +5% change is based on 80 mm, so 80 x 1.05 = 84 mm. The step changes are -20% and +5%; the overall change, based on 100 mm, is -16%. Multiply the factors 0.80 and 1.05 rather than adding the percentage numbers.

Exact reverse: 90 -> 100 mm

The required increase is (100 - 90) / 90 x 100% = +(100/9)%, approximately +11.111...%. Its exact multiplier is 10/9, and 90 x (10/9) = 100. A rounded +11.11% instead gives 99.999 mm. Keep the fraction when an exact inverse is required. This is a mathematical reversal, not evidence that a physical material can be restored.

Measurement reference

Numerical examples are hypothetical and prepared with AI assistance for Sewlore. No physical fabric specimen was tested.

Sewlore Fabric Measurement Methods Guide

Keep the base with the reading. Record the starting length, the percentage for each step, its signed factor and the intermediate value. Preserve the unit and each denominator so a later reader can reproduce the arithmetic.

Images provided by Pexels

Powered by Webnode Cookies
BUILT WITH WEBNODE Like this website? Yours can be live today. Like this website? Yours can be live today. Describe your idea, AI builds the first draft. No code, free to start.